|
APPLICABLE STANDARDS |
|
ITU-R M.1371-5:2014 |
EN 62311:2008 |
|
IALA A-126 Ed. 1.4:2008 |
EN 301 489-1 V2.2.0:2017 |
|
IEC 62320-2 Ed. 2.0:2016 |
EN 301 489-19 V2.1.0:2017 |
|
IEC 61108-1 Ed. 2.0:2003 |
EN 301 843-1 V2.2.1:2017 |
|
IEC 61162-1 Ed. 5.0:2016 |
EN 301 843-2 V2.2.1:2017 |
|
IEC 61162-2 Ed. 1.0:1998 |
EN 303 413 V1.1.1:2017 |
|
IEC 60945 Ed. 4.0:2002 |
EN 62368-1:2014 + A11:2017 |
|
GPS RECEIVER |
|
Receiving Channels |
50 channels |
|
Tracking & Navigation Sensitivity |
≧-159 dBm |
|
Reacquisition Sensitivity |
≧-159 dBm |
|
Horizontal Position |
＜2.5 m Autonomous
＜2.0 m SBAS |
|
Receiver Type |
SBAS: WAAS, EGNOS
MSAS, GAGAN |
|
TRANSMITTER PERFORMANCE |
|
TX Frequency Range |
156.025 MHz ~ 162.025 MHz |
|
Frequency Accuracy |
±500 Hz |
|
Channel Space |
25 KHz |
|
Channel Protection |
1 Sec max on air |
|
Modulation |
GMSK/FM |
|
Data Rate |
9,600 bps |
|
TX Power Control |
2/5/12.5 Watt (programmable) |
|
Carrier Power Error |
±1.5 dB (normal) |
|
Nominal Impedance |
50Ω |
|
RECEIVER PERFORMANCE (MANDO-303 only) |
|
Numbers of Receivers |
2 |
|
RX Frequency Range |
156.025MHz ~ 162.025 MHz |
|
Sensitivity |
PER 20% at -107 dBm |
|
Data Rate |
9,600 bps |
|
PER |
20% at -107 dBm |
|
Co-Channel Rejection |
10 dB at 1 KHz offset |
|
Adjacent Channel Rejection |
70 dB at 25 KHz |
|
Nominal Impedance |
50Ω |
|
POWER SUPPLY |
|
Supply Voltage |
12V DC nominal (at power connector) |
|
Supply Voltage Range |
9.6 ~ 15.6V DC |
|
POWER CONSUMPTION @ 12V DC |
|
MANDO-301 |
FATDMA ＜ 0.288 Ah/day * |
|
MANDO-303 |
FATDMA ＜ 0.432 Ah/day *
RATDMA ＜ 1.656 Ah/day * |
|
*At 12.5W; transmission scheduled every 3 min |
|
ENVIRONMENTAL |
|
Operating Conditions |
-20℃ ~ +55℃ |
|
Operating Temperature |
-30℃ ~ +70℃ |
|
Humidity |
95% relative humidity at 40℃ |
|
INPUT / OUTPUT |
|
1) One RS-232 port for configuration |
|
2) One RS-232 port for communication |
|
3) One isolated control output – N.C. relay for alarm indication (default) or other control usages |
|
4) One isolated status input channel with 5 mA constant current sink for external device status input (e.g. read light fault, light on/off, etc.) |
|
5) Four ADC channels for external sensors |
|
6) VHF Connector (SO-239 Female) |
|
7) GPS Connector (TNC Type) |
|
8) More extra I/O interfaces can be supplied via optional extension I/O board |
|
SOFTWARE TOOL |
|
AMEC AtoN Configuration |
PC configuration utility |
Products
